Product recommendations
Product Description
The AZ-Delivery Dev Kit C was designed by Espressif to provide an easy introduction to programming the new ESP32 dual-core processor. With a variety of new sensors and functions, this board represents the next step in IoT development.

Special features
- As with the predecessor model ESP8266, the WLAN functionality is implemented directly in the SoC, but with additional Bluetooth function (incl. BLE).
- The ESP32 processor used combines a CPU with 2 Tensilica LX6 cores, clocked at up to 240 MHz, and 512 kilobytes of SRAM in a single microcontroller chip.
- It also integrates a radio unit for WLAN (according to 802.11bgn) and Bluetooth (Classic and LE).
Technical specifications
Power supply voltage (USB) | 5V |
Input/output voltage | 3.3V |
Required operating current | Min. 500mA |
Soc | ESP32-Wroom 32 |
Clock frequency range | 80 MHz / 240MHz |
R.A.M. | 512kb |
External flash memory | 4MB |
I/o pins | 34 |
Interfaces | SPI, I2C, I2S, Can, Uart |
Wi-fi protocols | 802.11 b/g/n (802.11n up to 150 Mbps) |
Wi-Fi frequency | 2.4 GHz - 2.5 GHz |
Bluetooth | V4.2 - BLE and Classic Bluetooth |
Wireless antenna | PCB |
Dimensions | 56x28x13mm |

Digital and GPIO pins
The 32 pins provide UART, I2C, SPI, DAC, ADC (12 bit) and all GPIO pins can be used as an input or output.

Quick start guide
When buying one of our high-quality products, you will also receive an inclusive e-book for a quick introduction to the world of microelectronics.
Wichtige Downloads & Links
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Our bestsellers


Featured project proposal
Vor kurzem haben wir Ihnen eine komfortable Lösung zur Ansteuerung der WS2812 mit McLighting vorgestellt, diese lässt sich hervorragend in bestehende Smart-Home Systeme integrieren. Ein Standallone-Betrieb im AP-Modus ist damit jedoch nicht möglich.Deshalb möchte ich Ihnen heute die Steuerung unseres AZ-Brunnens vorstellen.
Weitere Projektvorschläge
Einstieg in OpenHab (Teil 2)
In einem unserer letzten Artikel haben wir gezeigt wie einfach OpenHABian Installiert werden kann und wie die Smart-Pool-Steuerung in OpenHab integriert wird, aufgrund der viele...
ESP32: Beide I²C-Schnittstellen verwenden
Vor einiger Zeit habe ich Ihnen gezeigt wie Sie mehrere I²C Geräte an einem Mikrocontroller betreiben können. Ein Kunde hat heute angefragt ob bzw. wie er 2 Module mit identisch...
More recommended products

